|
Product Details:
Payment & Shipping Terms:
|
Material: | Q195 | Length: | 16 24 Inch |
---|---|---|---|
Max Device: | 6 Gang | Thickness: | 1.60mm |
PREFAB: | Ruffin | Gang: | 3-5 Gang |
Prefab Open Box Stud Mud Ring Brackets 16inch 24 inch Rough-in Come With Outlet Box and Protective Cover Zinc Plated
Open box mounting bracket
1)Open box support allows for adjustablility of box position between studs
2) Support most North American boxes and/or plaster rings 4" SQ 4-11/16SQ
5"SQ and multi-gang boxes
3) Fits up to 1-1/2" wide studs 16" &24"on center
4) Compatible with rapid ring & adjustable plaster rings
5) Field cut to adjust to non-standard stud spacings
6) Stamped markings at 1/2" 1/4"and 1" increments to allow the installer to easily locate the desited box position
7) You may contact us for pre-fab assemblies
8) Bracket accessories require no tools to install
9) Fllor stand ensures consistent box height and eliminates need to measure for proper install height.
Alignment plate can be cut on a mark to make shorter length brackets
Can be used with floor stand
Increase strength and rigidity help withstand the stress of stress of drywall installation
Assemblies shipped with box installed on left side of brackets, unless othersie specified
The wall stud improved far-side support stands up during drywall,installation and out performs competitor bracket
Installation steps:
Application: These wall support brackets are used to support electrical boxes from floor or concrete forms.
They also help prevent electrical boxes from being pushed back into the wall cavity during drywall installation.
Advantages: fold back stabilizers ensure an easy and secure electrical box installation in wall applications. They are designed to mount square boxes on walls 12"to 24" above the floor. floor and wall kick plate support brackets have box screws that are exposed after mounting so the conduits can be secured from the front of the box opening. Additionally, their multiple heights accommodate a variety of fnished floor heights.
Application: These multi-box mounting brackets are used to secure conduit boxes in stud walls.
Advantages: Multi box mounting brackets allow the installer to quickly and easily mount 4", 4-11/16" or 6"square conduit boxes in stud walls.
Application: This box mounting bracket is used to support electrical box mounted to wood studs.
They screw directly to the face of wood studs.
Mansory Steel Junction Box 1.60MM Thickness Universal Knockouts Zinc Plated Silver Surface Pre fab Function
ZT-R91 | 1.0mm wall thick | mixed hole or one size hole 1-1/2" DEEP | |
ZT-R92 | 1.2mm wall thick | mixed hole or one size hole 1-1/2" DEEP | |
ZT-R93 | 1.5mm wall thick | mixed hole or one size hole 1-1/2" DEEP | |
ZT-R94 | 1.60mm (UL Listed) | mixed hole or one size hole 1-1/2" DEEP |
1) Using for EMT conduit cover for octangular / square / rectangle box.
2) All using automatic punching machine & molds, precise for each products.
3) K.O.S can make mixed size or only one size.
4) C/O cover and screws. Can make the bottom side hole as the terminal hole
5) Come without terminal brass part unless ordered, can be make one or two adjustable lug, thickness from 0.60mm to 1.60mm
1.Q: What kind of material you can offer?
A: We can offer you GALVANIZED STEEL, STAINLESS STEEL, ALUMINUM, Zinc, etc.
2.Q: What kind of standard you are following?
A: We are producing following by UL standard, most popular around the world,
of course, we also have customized products.You can provide your specification.
3.Q: Could you change the size for the customer?
A: Yes, we do for some customer special size.
4.Q: How many days can you deliver the order?
A: Normally after deposit or L/C 20-30 days, actually it depends on your request.
5.Q: What about the payment?
A: We can accept L/C, T/T, D/P and trusted payment methods.
6.Q: Do you provide samples?
A: yes, we can offer the standard product sample freely, but we do not bear the freight. Sample preparation will take some time, and if you asked to use DHL, FedEx, etc. to send samples, you can inform us in advance to prepare.
7.Q: Are you a trading company or manufacturing company?
A: Both we are, we have ten years experiences in foreign trading business and more than five years in electrical conduit industry. Of course, we are always expanding our business.
8.Q: How can you guarantee your products?
A: we guarantee your 100% satisfaction on all our products. Please feel free to feedback us immediately if you are not satisfied with our quality or service. If the product does not meet the contract requirements, we will send you a free replacement or give you compensation in the next order. For foreign orders, we ensure every order carefully. In some special cases, we will give some discounts as a solution.
9.Q: How about your capability in manufacturing?
Based on reasonable price, good quality, great after service, and Workers' Passion and Effort, we are capable of manufacturing 6000 tons of steel conduit per year and 4000 tons of die casting and steel accessories anually.
Choosing us is the best choice.
Designed for use with rigid/IMC and EMT conduit, these 5" steel boxes are suitable for audio, video, data and power applications in healthcare, education, commercial and government facilities.
0.8mm wall thick | 1/2" HIGHT, HOT DIP GALVANIZED STEEL COIL | ||
1.0mm wall thick | 1/2" HIGHT, HOT DIP GALVANIZED STEEL COIL | ||
1.2mm wall thick | 1/2" HIGHT, HOT DIP GALVANIZED STEEL COIL | ||
1.5mm wall thick | 1/2" HIGHT, HOT DIP GALVANIZED STEEL COIL |
0.8mm wall thick | 1/2" HIGHT, HOT DIP GALVANIZED STEEL COIL | ||
1.0mm wall thick | 1/2" HIGHT, HOT DIP GALVANIZED STEEL COIL | ||
1.2mm wall thick | 1/2" HIGHT, HOT DIP GALVANIZED STEEL COIL | ||
1.5mm wall thick | 1/2" HIGHT, HOT DIP GALVANIZED STEEL COIL |
Electrical 1.60mm Multi-Using Cover Conduit Junction Box Pre Galvanized Telescoping 1/2"D
Electrical 1.60mm Cover Conduit Junction Box Pre Galvanized One Two Gang 5/8" Deep
Electrical Conduit Box Cover Heavy Duty 1.60mm Cover With Screws
Ruff-IN Plate Brackets & Wall stud
Electrical 1.60mm Multi-Using Cover Conduit Junction Box Pre Galvanized One Two Gang 1/2" Deep
Increase strength and rigidity help withstand the stress of stress of drywall installation
Assemblies shipped with box installed on left side of brackets, unless othersie specified
The wall stud improved far-side support stands up during drywall,installation and out performs competitor brackets
16" STUD SPACING | come with stop plate |
24" STUD SPACING | sleeve extender |
Self Adjustable Pre-fab Ring | protective plate box plate |
Installation steps:
Application: These wall support brackets are used to support electrical boxes from floor or concrete forms.
They also help prevent electrical boxes from being pushed back into the wall cavity during drywall installation.
Advantages: fold back stabilizers ensure an easy and secure electrical box installation in wall applications. They are designed to mount square boxes on walls 12”to 24” above the floor. floor and wall kick plate support brackets have box screws that are exposed after mounting so the conduits can be secured from the front of the box opening. Additionally, their multiple heights accommodate a variety of fnished floor heights.
Application: These multi-box mounting brackets are used to secure conduit boxes in stud walls.
Advantages: Multi box mounting brackets allow the installer to quickly and easily mount 4”, 4-11/16” or 6”square conduit boxes in stud walls.
Application: This box mounting bracket is used to support electrical box mounted to wood studs.
They screw directly to the face of wood studs.
Pre-Fab RUFF-IN products leave all the troubles in our factory, to efficiantly and save time for the end user.
Open box mounting bracket
1)Open box support allows for adjustablility of box position between studs
2) Support most North American boxes and/or plaster rings 4" SQ 4-11/16SQ
5"SQ and multi-gang boxes
3) Fits up to 1-1/2" wide studs 16" &24"on center
4) Compatible with rapid ring & adjustable plaster rings
5) Field cut to adjust to non-standard stud spacings
6) Stamped markings at 1/2" 1/4"and 1" increments to allow the installer to easily locate the desited box position
7) You may contact us for pre-fab assemblies
8) Bracket accessories require no tools to install
9) Fllor stand ensures consistent box height and eliminates need to measure for proper install height.
Alignment plate can be cut on a mark to make shorter length brackets
Can be used with floor stand
1. Pictures of emt conduit box
2. Descriptions of emt conduit box
1) Using for EMT conduit cover for octangular / square / rectangle box.
2) All using automatic punching machine & molds, precise for each products.
3) K.O.S can make mixed size or only one size.
4) C/O cover and screws. Can make the bottom side hole as the terminal hole
5) Come without terminal brass part unless ordered, can be make one or two adjustable lug, thickness from 0.60mm to 1.60mm.
Telescoping Rigid Box Support 0.80mm Thickness 6 Gang Maximum Box Can Install
1) Increased strength and rigidity help withstand the stress of drywall installation
2) Assembly shipped with box installed on left side of bracket
3) The cover plate required fix also
4) Cable Wire also can fixed(include the terminal cable)
5) Assembly include alignment plate for easy adjust
6) The whole bracket with the size scale in order easy to adjust
Interlocking wrap-around design provides extra rigidity
pre-assembled at 3-5/8" back tabs can be folded out for 4"
multiple brackets may be ganged together
BOX BAR HANGERS, CAT. NOS. RL-HC02, RL-HC12, RL-HC24, RL-HC36, RL-CA22
bracket for 16" or 24"stud spacing
1,measure distance between studs
2,cut measurd ruler mark after
3,screw parts together
4,boxes size is 4" or 4-11/16" square
General - Made of Pre-galvanized steel. See following table, FIG., ILL. and dimensions for details.
Cat. Nos. | FIG. No. | ILL. No. | Accessory |
RL-HC02 | 1 | 1 | No |
RL-HC12 | 2 | 2 | No |
RL-HC24 | 3 | 3 | No |
RL-HC36 | 4 | 4 | No |
RL-CA22 | 5 | 5 | No |
BOX SUPPORT BRACKETS, CAT. NOS. RL-GB10, RL-GB20, RL-GB15, RL-GB25, RL-GB30, RL-GB40, RL-GB50, RL-GB60, RL-GB70, RL-GB80, RL-GB90.
General - Made of Pre-galvanized steel. See following table, FIG., ILL. and dimensions for details.
Cat. Nos. | FIG. No | ILL. No. | Accessory |
RL-GB10 | 6 | 6 | No |
RL-GB20 | 7 | 7 | No |
RL-GB15 | 8 | 8 | No |
RL-GB25 | 9 | 9 | No |
RL-GB30 | 10 | 10 | No |
RL-GB40 | 11 | 11 | No |
RL-GB50 | 12 | 12 | No |
RL-GB60 | 13 | 13 | No |
RL-GB70 | 14 | 14 | No |
RL-GB80 | 15 | 15 | No |
RL-GB90 | 16 | 16 | No |
Application: These multi-box mounting brackets are used to secure conduit boxes in stud walls.
Advantages: Multi box mounting brackets allow the installer to quickly and easily mount 4", 4-11/16" or 6"square conduit boxes in stud walls.
Application: These universal box mounting brackets are used to support electrical boxes mounted to metal or wood studs. They screw directly to the face of metal or wood studs.
Advantages: box mounting brackets are made from pre-galvanized steel ensuring durability and mechanical protection.
Stand off, fold back stabilizer tabs keep boxes from twisting in wall cavities
Application: These wall support brackets are used to support electrical boxes from floor or concrete forms.
They also help prevent electrical boxes from being pushed back into the wall cavity during drywall installation.
Advantages: fold back stabilizers ensure an easy and secure electrical box installation in wall applications. They are designed to mount square boxes on walls 12"to 24" above the floor. floor and wall kick plate support brackets have box screws that are exposed after mounting so the conduits can be secured from the front of the box opening. Additionally, their multiple heights accommodate a variety of fnished floor heights.
Application: This box mounting bracket is used to support electrical box mounted to wood studs.
They screw directly to the face of wood studs.
Electrical box supports 0.80mm Pre Galvanized 24" UL Listed
UL LISTED
Feature & Benefits For Prefabrication
1) All the basic assembly will leave for us,end user just use one hand and tool less fix
2) brackets accommodate multiple setups
3) comes with grounnd pigtail assembled
4) ideal for repective and none repetitive floor layouts
5) Reduce material storage,waste and handling
6) Devices are installed,side wire,taped and fitted with quick connect feature
7) Universal brackets have built in standoffs for up to 6" walls
8) brackets designed to stay together when mud ring is removed
9) The contractor can provide his own cable or buy custom-cut whips
Item Listed for prefabrication Junction box
Universal Mounting Brackets Fixed Box Liste
Type Of Junction-Box Use in assembly Type of bracket used in assembly
3-4" square 1-1/2" deep box 18" tall tick bracket
4-4" square 2-1/8" deep box 24" tall tick bracket
5-4-11/16" sq 2-1/8" deep box uni-fab standard bracket
type of mud ring:
one gang or two gang
specification of corrent of device
1: 15amp 2: 20amp 3: 30amp 4: 40 amp 5: 50 amp
Specify grade of device:
1: COMMERCIAL
2: HOSPITAL
3: INDUSTRIAL
4: RESIDENTIAL
FLEXIBLE REDUCE WALL THICKNESS STANDARD UL LISTED
INSIDE DIA. | OUTSIDE DIA. | ITEM | PITCH | GAL.COIL | MIN.BEND | STANDARD | ||
IN. | MM | MM | CODE | MM | THICKNESS | RADIUS | PACKAGE METERS | |
3/8" | 12mm | 15.50mm | RL-F33-12 | 4.70mm | 0.30mm | 33 Degree | 100 Meters | |
1/2" | 15mm | 20.00mm | RL-F33-15 | 5.70mm | 0.35mm | 38 Degree | 50 Meters | |
3/4" | 20mm | 25.00mm | RL-F33-20 | 6.40mm | 0.35mm | 45 Degree | 30 Meters | |
1" | 25mm | 30.30mm | RL-F33-25 | 8.70mm | 0.35mm | 55 Degree | 30 Meters | |
1-1/4" | 32mm | 38.00mm | RL-F33-32 | 10.50mm | 0.40mm | 62 Degree | 15 Meters | |
1-1/2" | 38mm | 45.00mm | RL-F33-38 | 11.40mm | 0.40mm | 90 Degree | 15 Meters | |
2" | 50mm | 58.00mm | RL-F33-50 | 11.40mm | 0.40mm | 110 Degree | 10 Meters | |
2-1/2" | 63mm | 74.50mm | RL-F33-63 | 14.20mm | 0.45mm | 130 Degree | 10 Meters | |
3" | 75mm | 83.50mm | RL-F33-75 | 14.20mm | 0.50mm | 145 Degree | 5 Meters | |
3-1/2" | 83mm | 95.55mm | RL-F33-83 | 14.20mm | 0.60mm | 160 Degree | 5 Meters | |
4" | 100mm | 108.50mm | RL-F33-100 | 14.20mm | 0.60mm | 210 Degree | 5 Meters |
STEEL OUTLET BOX UL LISTED STANDARD
1) HANDY UTILITY
Catalog | Knockouts | Wall | Hight | Quantity | Weight (kgs) | |
Number | Side | Bottom | Thickness | Inch/mm | Per Carton | Per Carton |
886620 | 8*1/2" | 3*1/2" | 1.60mm ±0.20 | 1-1/2"/38mm | 50 | 9.05±1.00 |
886621 | 8*1/2" | 3*1/2" | 1.60mm ±0.20 | 1-7/8"/47mm | 50 | 9.90±1.00 |
88662C | 6*1/2"& 2*1/2"in 3/4" | 2*1/2"&1*3/4" | 1.60mm ±0.20 | 1-7/8"/47mm | 50 | 9.90±1.00 |
2) SQUARE BOX
3) Octagon
insulated malleable and zinc bushing listed catalog
Catalog | Trade Size | Metric | Diameter | Lug | Quantity | Weight(kgs) | ||
Number | Inside(mm) | Outside(mm) | Size | Per Carton | Per Carton | |||
RL-Z880 | 1/2" | 16 | 19.20±0.50 | 23.01±0.50 | #4-#14 | 500 | 9.17±2.00 | |
RL-Z881 | 3/4" | 21 | 24.35±0.50 | 28.06±0.50 | #4-#14 | 500 | 10.25±2.00 | |
RL-Z882 | 1" | 27 | 30.96±0.50 | 34.44±0.50 | #4-#14 | 300 | 8.40±2.00 | |
RL-Z883 | 1-1/4" | 35 | 39.66±0.50 | 43.58±0.50 | #4-#14 | 250 | 9.25±2.00 | |
RL-Z884 | 1-1/2" | 41 | 45.69±0.50 | 49.92±0.50 | #4-#14 | 250 | 10.42±2.00 | |
RL-Z885 | 2" | 53 | 58.00±0.50 | 62.16±0.50 | #4-#14 | 100 | 5.75±2.00 | |
RL-Z886 | 2-1/2" | 63 | 69.48±0.50 | 75.05±0.50 | #1/0-#8 | 50 | 6.13±2.00 | |
RL-Z887 | 3" | 78 | 86.05±0.50 | 91.15±0.50 | #1/0-#8 | 50 | 7.30±2.00 | |
RL-Z888 | 3-1/2" | 91 | 97.68±0.50 | 103.80±0.50 | #1/0-#8 | 40 | 6.66±2.00 | |
RL-Z889 | 4" | 103 | 110.05±0.50 | 116.50±0.50 | #1/0-#8 | 40 | 8.06±2.00 |